|
|
||||||
Header: Hal-Zuzzu Model Railway Build Blog |
||||||
| Published: Tuesday, November 10, 2020 | ||||||
| Post: #11/176 - Views: 45530 |
||||||
|
||||||
|
||||||
Printed the layout in 1:1 ratio, and laid it on the model railway surface. 
To be honest, I found it a total waste of paper and ink. I found no use for it, except to take this picture and admire it for a while. The minute I removed it, I got out my trusty tape measure, ruler and permanent marker, I put on my thinking cap and did it old school, the way I know how! I wanted to build it myself, and not trace the layout. Were's the fun in that? I read the measurements on the plan, measure them on the layout, and mark where the track underlay will be glued. So, starting with the red track, I glued the cork for the straight rails first. Next I'll draw and cut the bends and glue those. More soon.. Stay tuned and don't forget to register for post updates... Check out the live CCTV camera HERE |
||||||
|
||||||
|
|
||||||
